Aluminum extrusion is a very sticky and gummy material. So to go fast, you need very sharp end mill with a unique design in order to evacuate the chip very fast. We achieve it by having the cutting edge polished to a mirror finish that will get the chips sliding up.
Aluminum extrusion is a very sticky and gummy material. So to go fast, you need very sharp end mill with a unique design in order to evacuate the chip very fast. We achieve it by having the cutting edge polished to a mirror finish that will get the chips sliding up.
Single Flute End Mills
Single Flute End Mill with Carbide “Mirror Finish” – 1/4″x3/4″x2″x1/4″
$USD 71.11
KL-TO0015
Single Flute End Mills
Single Flute End Mill with Carbide “Mirror Finish” – 1/4″x3/4″x2″x1/4″ DLC Coating
$USD 93.49
KL-TO0016
Sale!
Original price was: $USD 67.81. $USD 23.42Current price is: $USD 23.42.
KL-TO0060
Single Flute End Mills
Single Flute End Mill with Carbide “Mirror Finish” – 5x16x60x6mm
$USD 70.45
KL-TO0009
Single Flute End Mills
Single Flute End Mill with Carbide “Mirror Finish” – 5x16x60x6mm DLC Coating
$USD 91.52
KL-TO0010
Single Flute End Mills
Single Flute End Mill with Carbide “Mirror Finish” – 5×18/50x100x8mm
$USD 200.81
KL-TO0062
Single Flute End Mills
Single Flute End Mill with Carbide “Mirror Finish” – 5×18/50x100x8mm DLC Coating
$USD 240.31
KL-TO0063
Single Flute End Mills
Single Flute End Mill with Carbide “Mirror Finish” – 5x10x50x6mm DLC Coating
$USD 81.40
KL-TO0061
Français